Troyka Pad 1×2

Vendor code AMP-B068
In Stock
1 pc.
DHL Express, it’s traceable and reliable
Visa / MasterCard

Mount a relay in your electrical switchboard, attach a bluetooth dongle to your robot, or assemble or assemble a complex indicator panel with the 1x2 Troyka Pad.

This pad is designed to quickly connect individual and dual Troyka modules and create complex circuits on a common bus.

There are twelve L-shaped pins on both sides of the Troyka Pad. The spacing of the terminal block is 2.54 mm which means it’s convenient to switch to standard expansion boards, or you can connect them directly to the controller. When wiring be sure to use a female connector.

Individual lines can be easily combined into a common bus if needed. To do this this, wire the pins with jumper cable.

To ensure the secure attachment of the modules, two holes for M3 screws and corner roundings with a radius of 1.6 mm are provided. If the modules will not be exposed to serious physical stress, you can attach them with double-sided tape.


  • Dimensions (without pins): 50.8 × 25.4 mm (2 × 1 in)
  • Dimensions (with pins): 62.4 × 25.4 mm (2.5 × 1 in)
  • Height: 11.0 mm